Culvert Repair and Leak Sealing- Slabjack Geotechnical

1-855-752-2522

www.SlabjackGeotechnical.com

One of the things we do to save water districts and irrigation districts as well as municipalities a ton of money and down time is leak sealing. It is a fast and lasting solution to the problem of cracked and leaking culverts, canals and pipe.

The solution is our expanding hydrophobic polymer. It pushes out water and seals cracks, joints and holes up to several inches in diameter. In many cases we can even work with water in the culvert or canal.

Culverts are prone to undermining especially during high water flows such as winter runoff. In addition, joints can and do fail and cracks can develop. These problems, if not sealed result in loss of water, washouts, settling bridge approaches and worse.

Using our patented hydrophobic polyurethane grout Slabjack Geotechnical seals leaks into and out of pools, culverts, canals, pipes, manholes and just about anything else you can Imagine. Call today.

1-855-752-2522

www.SlabjackGeotechnical.com

Superior technology, Superior polymers, Superior results.

Bulkhead repair and stabilization – Slabjack Geotechnical

Bulkhead Repair and Stabilization

www.SlabjackGeotechnical.com

855-752-2522

We just recently completed a residential Seawall stabilization project in Bellingham using a single component polyurethane to permeate the soil behind the wall and to seal cold joints.

Using a single component polyurethane mixed with a catalyst that reacts with water, Slabjack Geotechnical is able to inject material deep behind the wall which permeates the soil and return stability to the Seawall or Bulkhead.

This method is by fa the safest way to stabilize Seawalls and bulkheads. Plural component polyurethane can place enormous lateral stress against the wall and cause damage such as bowing, in the case of walls, or in the case of bulkheads, moving rocks out of position or worse.

There are applications where plural component polymers make sense but they are not as thorough at sealing cold joints, filling underneath footers and creating a watertight barrier behind the wall.

If you are dealing with soggy soil wall or worse give us a call today,

855–752–2522

Superior technology, Superior polymers, Superior results!

Visit www.SlabjackGeotechnical.com

bulkhead repair and stabilization - sealing cold joints
bulkhead repair and stabilization – sealing cold joints

Culvert and large diameter pipe sealing – Slabjack Geotechnical

Culvert and Large Diameter Pipe Sealing
Culvert and Large Diameter Pipe Sealing

1-855-752-2522

www.SlabjackGeotechnical.com

Large Diameter Pipe Repair Methods,
We use two primary placement methods to repair large diameter pipes and culverts: spraying and injecting.

Spraying
We spray polyurethanes to rebuild joints that are poorly-seated, have dislodged, deflected or deteriorated. The materials we spray have excellent adhesion to all of the common large diameter pipe materials, such as concrete, HDPE, PVC, galvanized metal & aluminized metal. Sprayed systems are excellent for sealing joints before back grouting (see below) to contain the void filling material outside of the pipe to reduce waste.

Injecting
We inject plural component polyurethanes and single component polyurethanes outside of large diameter pipes to fill voids, fix sinkholes and provide stability. Injection is commonly used for leak-stopping as well.

Give is a call today for an onsite inspection and estimate for your large diameter pipe or culvert repair.

1-855-752-2522

Superior technology,  Superior polymers, Superior results.

Geotechnical solutions with Slabjack Geotechnical

Slabjack Geotechnical

1-855-752-2522

www.SlabjackGeotechnical.com

Geotechnical polymers have begun to revolutionize infrastructure repair and engineers are finding more and more ways to utilize the incredible power of polymers. For example;

Culvert and ditch repair; By under sealing ditches and sealing erosion at joints and inlets, ditches, dam spillways and roads are preserved. High water flows often create alternate paths for water. Given enough time or flow and failure of the culvert or ditch is assured. Injecting hydrophobic polyurethane into these voids seals out water and stabilizes the structure.

Concrete road stabilization and leveling; Commonly done at the bridge deck junction or above utility trenches to raise settled concrete roads built above, high density polymer foam is injected   Under the slab to gently raise the roadway back to proper elevation. This process typically takes as few as a couple of days verses weeks for replacement.

Railroad crossings; These are prone to settling which creates a very uncomfortable transition for both train and automobile traffic. High density polymer foam is injected underneath the rail bed, incredibly the polymer supports far in excess the weight of fully loaded trains. Often this can be completed around already scheduled traffic.

Heavy weight bearing slabs often large warehouses which house heavy machinery such as milling equipment and the like. Geotechnical scans are often performed to determine if the slab will carry the weight of the additional machinery and if not a plan to stabilize the sub grade decided upon. The least invasive by far is geotechnical foam. Through a series of injection points, liquid polymer is pumped under the slab. This expands many times in volume and sets to a ridged, high density structural foam capable of supporting thousands of pounds per square foot.

These are just a few of the many uses of today’s polymers.

Call today, Slabjack Geotechnical

Superior technology, Superior polymers, Superior results.

Bridge approach raising by Slabjack Geotechnical

18557522522
1-855-752-2522

On of the problems with municipal roadways and bridges  is the settling of the concrete approach just prior to the bridge. The bridge itself is something that rarely settles due to the fact that the base typically goes to bedrock the approach however is normally just laid on compacted gravel and like any slab is susceptible to settling for a variety of reasons such as groundwater migration, erosion and a breakdown of organic layers beneath the concrete.

Slabjack Geotechnical is fully capable of handling these types of jobs. Depending on the size of the approach and the scope of work we can bring two or more complete operational rigs to quickly raise and stabilize bridge approaches, airport runways, loading bays and more.

For a no obligation estimate call today,

1-855-752-2522

www.SlabjackGeotechnical.com

Superior technology, Superior polymers, Superior results.

Culvert repair and leak sealing with Slabjack Geotechnical

18557522522
1-855-752-2522

One of the things we do to save water districts and irrigation districts as well as municipalities a ton of money and down time is leak sealing. It is a fast and lasting solution to the problem of cracked and leaking culverts, canals and pipe.

The solution is our expanding hydrophobic polymer. It pushes out water and seals cracks, joints and holes up to several inches in diameter. In many cases we can even work with water in the culvert or canal.

Culverts are prone to undermining especially during high water flows such as winter runoff. In addition, joints can and do fail and cracks can develop. These problems, if not sealed result in loss of water, washouts, settling bridge approaches and worse.

Using our patented hydrophobic polyurethane grout 1-855-752-2522 seals leaks into and out of pools, culverts, canals, pipes, manholes and just about anything else you can Imagine. Call today.

1-855-752-2522

www.SlabjackGeotechnical.com

Superior technology, Superior polymers, Superior results.