5 Advantages of Engaging Concrete Grinding Service to Install Your Concrete Floor

concrete grinding services

Concrete grinding is a great option for homeowners who wish to have smooth concrete floors that are appealing and long-lasting. Today, many American homeowners seek concrete grinding services for their damaged concrete floors or new concrete floor installations. Concrete floor grinding results in attractive and well-polished floors that resemble granite and marble. Here are the advantages of engaging concrete grinding services for your floors.

1. Durable Concrete Floors

Concrete is the world’s most used manmade material, because of its many advantages. Concrete grinding involves polishing concrete with an abrasive tool reinforced with diamond attachments until a smooth finish is achieved. Because concrete grinding does not dislodge the concrete, nor add an extra layer of flooring, the concrete floor is sturdy and durable. It can accommodate heavy equipment without sinking in or getting damaged. The average strength of concrete is about 3,000 psi, and some concrete can reach strengths of over 20,000 psi. This makes concrete floor grinding attractive for domestic and commercial use, where the floors accommodate heavy traffic.

2. You Get Magnificent Floors

Some of the best looking floors are concrete floors. When you engage the expert and experienced professionals for your concrete grinding, you will be impressed by the texture, look, and finish of your concrete floors. After extensive polishing, concrete gets a high sheen that complements the natural lighting of a room. The natural polish and look of concrete floors also enhance the interior design of your house. Concrete grinding services ensure that your concrete floors are shiny with high gloss surfaces that are not only beautiful but also reflect light. This is a welcome attribute that gives a room natural light, while also cutting down on the overall cost of lighting.

3. Low Maintenance Costs

Concrete floors are easy to clean and maintain. After paying for the initial concrete grinding services, you will not have other maintenance costs to pay. You can easily clean any dirt or dust that accumulates on the concrete floors by sweeping or mopping. Given that concrete floors are tough and strong, you may not need to conduct any repairs in a long time. Compared to other floors, the repair and maintenance costs of concrete floors give homeowners a huge cost advantage.

4. Concrete Grinding Services Are Fast and Affordable

The experienced concrete grinding contractors will complete large floor grinding projects in record time. The concrete grinding process is not complicated, as it utilizes fewer construction materials. The contractors only need the grinding tools and protective clothing for the dust produced during the concrete grinding. The process takes place in several stages. Concrete polishing is the last stage. Contractors may need to use some polishing compounds to get rid of any dust residues. Overall, the process is fast, and because of the few materials used, concrete floor grinding is affordable.

5. Concrete Grinding is Eco-friendly

Because there are no chemicals used in concrete grinding, the process is eco-friendly and does not pose a danger to the immediate environment. Additionally, dust is the only waste produced by concrete grinding. Even so, the dust can be reduced by grinding the concrete under wet conditions. Other floors, such as tile and laminate floors, may produce excess waste or utilize chemicals and materials that are not friendly to the environment.

Here are a few more applications of concrete grinding:

Concrete grinding services are not limited to homeowners who wish to install concrete floors or those with damaged concrete. Businesses can also install concrete floors in their warehouses and showrooms. Large institutions such as schools, churches, and hospitals also utilize concrete floors. The strength and durability of concrete floors make it useful in many outdoor applications that must withstand heavy traffic.

Ultimately, the quality of your concrete floors will be as good as the concrete grinding services you receive. Therefore, you must engage the top concrete grinding contractors in your state to install your concrete floors. When your concrete floors are well-done, they will serve you for decades without the need for expensive repairs.

4 Common Causes of Cracks on Concrete

Concrete is a popular building material used across the world — more than any other human-made material. You most likely have concrete structures on your home, be it on the floors, sidewalks, or patios. Concrete cracks and voids are the bane of every homeowner. When you spot cracks, you should seek concrete crack repair services as soon as you can. Here are the common causes of cracks.

1. Excess Water in the Mix When Installing Concrete

Concrete is made from combining cement with sand or gravel, and water. It takes an experienced and expert contractor to strike the right balance of cement, sand, and water when making concrete. When excess water is used in the mix, it leaves cracks and voids on the slab when it eventually evaporates. Experts call it plastic shrinkage cracking. You may spot these cracks a few days after the job is complete.

Mostly, the cracks will start around the re-entrant corners, and where the concrete intersects with objects such as pipes, utility holes, and drains. When you spot these cracks, you should get a repair service before they spread. That’s why you should be very careful when picking a contractor for your concrete works. When concrete is installed correctly, you’ll not worry about crack repairs for the foreseeable future.

2. Thermal Changes

Temperature differences within the concrete or the surroundings can result in cracks. Generally, heat causes it to expand. When this happens, and it does not have enough room to expand, it pushes other structures like brick walls or house pillars that stand in its way. This causes stresses and cracks start emerging with time. Typically, contractors utilize expansion joints that relieve the stress created by the expansion.

Additionally, extreme temperature changes like excess heat in the summer or the chill cold in winter may also trigger cracks. Therefore, during summer, your concrete expands. Come fall, it contracts. With time, the stress impacted on it may exceed the in-place tensile strength. Before long, your concrete begins to crack. However, thermal cracking can be combated by preparing in advance and seeking crack repair services.

3. Overloading the Concrete Slab

You may over-estimate the maximum weight that your concrete can hold because we all know that it is massively strong. However, when you overload it, cracks are bound to appear. This is more common on commercial concrete floors than on residential concrete in your home. But after extended periods of heavy rains, the ground below the concrete may get soft if some of the water penetrates to the underground. Therefore, it will sink when heavy objects like your RV runs on it.

4. External Stress on the Concrete

When you are repairing the immediate area around or within your concrete, it’s possible to interfere with the structural integrity of the concrete and cause cracks. For instance, you may be doing plumbing repairs and have to access a pipe that overlaps with the concrete. During the repair process, you may interfere with the concrete and cause some cracks around the corners. If you don’t get the cracks repaired, they’ll soon spread to the rest of the concrete floor. When you have any repairs or renovations in your home that touch the concrete, it’s wise to seek concrete services to repair any damage that may have been imparted on your concrete.

You must engage a reputable contractor for your construction projects. Professional installation will not only yield floors that are appealing but also long-lasting works. Nonetheless, cracks may still invade the floor even then. This is not a reason to panic, as you can engage crack repair services to fix any cracks and voids. There are many methods of crack repair which include void filling, joint caulking, epoxy injection (exterior), or polyurethane injection (interior).

The mistake that most homeowners make is trying to DIY crack repair. Instead, you should trust an experienced contractor near you for professional crack repair services.