Culvert repair and leak sealing with Slabjack Geotechnical

May 13, 2016by Jerald Sargent2

slabjack logo

One of the things we do to save water districts and irrigation districts as well as municipalities a ton of money and down time is leak sealing. It is a fast and lasting solution to the problem of cracked and leaking culverts, canals and pipe.

The solution is our expanding hydrophobic polymer. It pushes out water and seals cracks, joints and holes up to several inches in diameter. In many cases we can even work with water in the culvert or canal.

Culverts are prone to undermining especially during high water flows such as winter runoff. In addition, joints can and do fail and cracks can develop. These problems, if not sealed result in loss of water, washouts, settling bridge approaches and worse.

Using our patented hydrophobic polyurethane grout 1-855-752-2522 seals leaks into and out of pools, culverts, canals, pipes, manholes and just about anything else you can Imagine. Call today.

1-855-752-2522

www.SlabjackGeotechnical.com

Superior technology, Superior polymers, Superior results.

2 comments

  • Barry Hubbard

    August 27, 2020 at 9:19 am

    I have concrete culverts seals that are leaking. what’s the $$$ is your product? is it applied to the inside or outside of the culvert .

  • Jerald Sargent

    February 15, 2021 at 7:33 pm

    It is injected on the outside of the buried culvert. This can be done from inside the culvert of from above.

Leave a Reply

Leave Us A Review Below:
Proud Member of:

CORPORATE OFFICE:

630 Valley Mall Parkway #431 East Wenatchee, WA 98802

Hours of Operation:

Monday – Friday: 8am-5pm

Saturday & Sunday: Closed

We have local branches serving Idaho and Washington.

Contractor License #SLABJG*833K2

Slabjack Geotechnical, 2024 © All Rights Reserved