Bulkhead repair and stabilization – Slabjack Geotechnical

September 19, 2017by Jerald Sargent0

Bulkhead Repair and Stabilization

www.SlabjackGeotechnical.com

855-752-2522

We just recently completed a residential Seawall stabilization project in Bellingham using a single component polyurethane to permeate the soil behind the wall and to seal cold joints.

Using a single component polyurethane mixed with a catalyst that reacts with water, Slabjack Geotechnical is able to inject material deep behind the wall which permeates the soil and return stability to the Seawall or Bulkhead.

This method is by fa the safest way to stabilize Seawalls and bulkheads. Plural component polyurethane can place enormous lateral stress against the wall and cause damage such as bowing, in the case of walls, or in the case of bulkheads, moving rocks out of position or worse.

There are applications where plural component polymers make sense but they are not as thorough at sealing cold joints, filling underneath footers and creating a watertight barrier behind the wall.

If you are dealing with soggy soil wall or worse give us a call today,

855–752–2522

Superior technology, Superior polymers, Superior results!

Visit www.SlabjackGeotechnical.com

buklhead and stabilization sealing cold joints

Leave a Reply

Leave Us A Review Below:
Proud Member of:

CORPORATE OFFICE:

630 Valley Mall Parkway #431 East Wenatchee, WA 98802

Hours of Operation:

Monday – Friday: 8am-5pm

Saturday & Sunday: Closed

We have local branches serving Idaho and Washington.

Contractor License #SLABJG*833K2

Slabjack Geotechnical, 2024 © All Rights Reserved