Concrete Leveling in Washington

January 1, 2019by Jerald Sargent0
1-855-752-2522

www.SlabjackGeotechnical.com

Curious about concrete leveling and void filling? When we come to your site we are bringing $100,000 worth of concrete leveling equipment, tools and material, along with the experience of our crew having raised thousands of settled concrete slabs.

As we arrive on the job site, the first thing we do is start the equipment and while the material warms, we determine the best location for the injection valves and drill 5/8″ holes at those locations. For very narrow slabs settled on their side, jacks may be used to position the slab prior to the lifting process.

To monitor the lift we use extremely sensitive gauges are used that measure 1000ths of an inch. This is important so we don’t over lift the slab. Those gauges are also critical when void filling where lift is not desired.

Once the lifting and/or void filling is complete the holes are patched with quick-setting mortar, tinted and colored, if necessary, to match your concrete and the job site is swept clean. When we leave, your are free to use your concrete. We use quick set mortar that is hard after about half an hour, but you will want to avoid direct water pressure for a day.

When you hire Slabjack Geotechnical to raise your settled concrete, you can rely on four things; Superior Technology, Superior Polymers, Superior Training, Superior Results.

www.SlabjackGeotechnical.com
1-855-752-2522

Leave a Reply

Leave Us A Review Below:
Proud Member of:

CORPORATE OFFICE:

630 Valley Mall Parkway #431 East Wenatchee, WA 98802

Hours of Operation:

Monday – Friday: 8am-5pm

Saturday & Sunday: Closed

We have local branches serving Idaho and Washington.

Contractor License #SLABJG*833K2

Slabjack Geotechnical, 2024 © All Rights Reserved